Symbol Technologies WS 2000 - Manual (Page 117)

A Field Office Example
Configuring the LAN
Leo clicks the “+” to the left of Network Configuration in the left menu. It expands and he
selects the LAN item.
This screen shows the subnets, their IP addresses, and the network interfaces (the
10/100BaseT ports and the WLANs) that are currently associated with each subnet. All of
the subnets are enabled; no changes are needed there.
Next Leo needs to configure each of the subnets. He clicks the “+” symbol to the left of
LAN in the left menu to expand it.
Configuring the Engineering LAN
Leo selects the first subnet from the choices under the LAN heading. He enters a new name
for the subnet, “Eng-SN”, to make it easier to recognize this subnet throughout the WS
2000 interface.
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved 117
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004