Symbol Technologies WS 2000 - Manual (Page 89)

Retail Use Cases
Clarisa starts her web browser and enters “http://192.168.0.1/” as the URL. The WS 2000
sends a login page to her browser.
She logs in using “admin” for the username and “symbol” as the password.
Entering the Basic System Settings
Clarisa selects System Settings in the left menu, located under the System Configuration
heading.
The System Name is used to distinguish between WS 2000 switches for remote
configuration. She gives the switch a descriptive name, “SanJose-1”. This name will appear
in the footer for subsequent configuration windows for the switch. She does not need the
name now, while she is in San Jose. But later, when she returns to corporate headquarters
and wants to log into several switches remotely, it will help her to know which switch she is
working on. She also enters a slightly longer description on the System Location field.
She enters her email address into the Admin Email Address box. CCC uses an SNMP
manager that has the capability of monitoring network devices and sending email to the
manager of a device that is in an unusual state. This is the email address that will be
supplied to that SNMP manager for this switch.
She sets the country to “United States - US”. Different countries have different regulations
for the use of these radio frequencies. Setting the location configures the switch to use only
the channels, frequencies, and power levels that are legal for that country.
Clarisa clicks the Apply button to save her changes.
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved 89
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004