Symbol Technologies WS 2000 - Manual (Page 64)

System Administration
How to Restart the WS 2000 Wireless Switch
During the normal course of operations, the administrator might need to restart or reset the
switch. For example, changing certain configuration settings can require restarting the
switch for those settings to take effect.
1. Select System Configuration --> System Settings from the left menu.
2. Click the Restart WS 2000 button to restart the switch. A second window appears,
asking for confirmation.
3. Select the Restart button. Upon confirming the restart, the switch reboots. Typically,
normal communications with the switch are restored within a minute or two.
Note: Configuration settings are unaffected by the restart process;
however, all cumulative transmission and reception statistics are reset to
zero.
Updating the WS 2000 Wireless Switch’s Firmware
From time to time, Symbol will release updates to the WS 2000 Wireless Switch’s
firmware. These updates will include:
• Information about how to communicate with newly released Access Ports
• Updates for security issues that have been identified
• Fixes to any software problems that have been identified
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved 64
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004