Symbol Technologies WS 2000 - Manual (Page 124)

A Field Office Example
Leo clicks any of the NAT Ranges button to the right of the IP addresses. The 1 to Many
Outbound Mappings window displays. Leo uses the pull-down menu to set the outbound
IP address for each subnet. These are the same as the inbound IP addresses that he specified
when he configured the WAN.
He clicks the Ok button to save his entries, and then clicks the Apply button in the NAT
screen.
The next step is to configure the firewall.
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved 124
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004