Sony HDW-M2100 - Manual (Page 111)

Appendix
Appendix
A-7
HD/SD video output phase settings
For the HD/SD video output phase setting, you can use
the maintenance menu.
For details, refer to the Installation Manual.
Item number Item name Settings
M3 M3A: OUTPUT
PHASE SELECT M3A0: HD PHASE SEL Select the HD video output signal phase with respect to the
reference signal: 0H or –90H (HD) advanced.
0H : Output in sync with the reference signal.
–90H: Output with the phase delayed by –90H (HD) with respect
to the reference signal.
M3A1: SD PHASE SEL Select the SD video output signal phase with respect to the
reference signal: 0H or –2H (SD) advanced.
0H : Output in sync with the reference signal.
–2H: Output with the phase delayed by –2H (SD) with respect to
the reference signal.
M3A2: SD UPCNV SEL Select whether the SD video output signal phase in SD tape
playback should be in sync or one frame delayed.
noml : Output the SD video with the phase unchanged. (The
HD video output is delayed by one frame with respect to the
reference signal.)
HD: Output the SD video with the phase delayed by one frame.
(The HD video output and SD video output are in phase with
the reference signal.)
Note
The SDSDI (D1) output and component/composite
outputs have the same phase.
For details of the audio/timecode output phase, see Setup
menu item 338.