Sanyo PLC-WXE46 - Manual (Page 28)

PLC-WXE46/WXL46 Expand Serial Command Functional Specifications
28/65
8.7.6 CF_VPOS Command
Command “CF_VPOS_%1”[CR]
%1
“015” --------- +15
“014” --------- +14
“002” --------- +2
“001” --------- +1
“000” --------- +0
“-01” ---------- -1
“-02” ---------- -2
“-14” ---------- -14
“-15” ---------- -15
“UP” ---------- Vertical Position setting value + 1
“DN” ---------- Vertical Position setting value – 1
Details
Set Vertical Position
This command is available in normal Power ON status.
Note1) When Screen setting is not Custom, projector returns 101[CR] and the
command does not excute.
Note2) When there is no Input, projector returns 101 and the command does not
excute.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.7.7 CF_HSCALE Command
Command “CF_HSCALE_%1”[CR]
%1
“032” --------- +32
“031” --------- +31
“002” --------- +2
“001” --------- +1
“000” --------- +0
“-01” ---------- -1
“-02” ---------- -2
“-31” ---------- -31
“-32” ---------- -32
“UP” ---------- Horizontal Scale setting value + 1
“DN” ---------- Horizontal Scale setting value - 1
Details
Set Horizontal Scale
This command is available in normal Power ON status.
Note1) When Screen setting is not Custom, projector returns 101[CR] and the
command does not excute.
Note2) When there is no Input, projector returns 101 and the command does not
excute.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]