Sanyo PLC-WXE46 - Manual (Page 34)

PLC-WXE46/WXL46 Expand Serial Command Functional Specifications
34/65
8.10.7 CF_SCREENASPECT Command
Command “CF_SCREENASPECT_%1”[CR]
%1
“43MODE” ------------Select 4:3 mode
“169MODE” ---------- Select 16:9 mode
“1610MODE” --------- Select 16:10 mode
Details
Set up Screen aspect.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.10.8 CF_TERMINAL Command
Command “CF_TERMINAL_%1”[CR]
%1
“COMPUTER” ------------------- Select Computer 2 in Terminal function.
“MONITOR” ----------------------- Select Monitor out in Terminal function.
Details
Set up Terminal.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable
“Error Code”[CR]
Projector returns “101” when Computer 2 is selected to current
input to project.
8.10.9 CF_INPUTSEARCH Command
Command “CF_INPUTSEARCH_%1”[CR]
%1
“OFF” ------------------------- Set Input search operation to OFF
“ON1” ------------------------- Set Input search operation to On1
“ON2” ------------------------- Set Input search operation to On2
Details
Set Input search operation mode.
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.10.10 CF_STANDBYMODE Command
Command “CF_STANDBYMODE_%1”[CR]
%1
“ECO” ---------------------- Less standby electricity
“NORMAL” ------- -------- Normal standby electricity
Details
Switch Standby Mode setting.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]