Krell Industries 7.1 - Manual (Page 32)

28 Krell Home Theater Standard 7.1
Follow these steps to connect the Home Theater Standard 7.1 to the
video sources and monitor in your system:
1. Connect the video outputs on each video source in your system
to video inputs on the Home Theater Standard 7.1.
2. Connect the video outputs on the Home Theater Standard 7.1
labeled OSD to the inputs of the video monitor.
The on screen display (OSD) needs to be active in order to access
the Home Theater Standard 7.1 configuration menu.
1. Power on the Home Theater Standard 7.1 by switching the back
panel power switch to on. Wait for the Home Theater Standard
7.1 to initialize. The words
PLEASE WAIT, INITIALIZING appear in the
front panel display (24), followed by the appearance of the model
name, the software version, and the AC line frequency in the dis-
play window. After a short period of time, the front panel display
becomes blank.
2. Then press the power button (1) on the front panel or the power
pre key (58) on the remote control to power on the Home
Theater Standard 7.1. The Home Theater Standard 7.1 defaults
to the DVD device which is configured with the following factory
defaults: video signal=component; format=NTSC Interlaced.
3. Select the video device that matches the video connection
from the Home Theater Standard 7.1 to the video monitor. See
Figure 4, on page 25, for North American operation or Figure 5,
on page 26, for International operation.
4. Press the device selection button on the front of the Home
Theater Standard 7.1, or use the remote control key dedicated to
the video device. The device selection LED on the front panel of
the Home Theater Standard 7.1 illuminates.
5. Press the menu key (82) on the remote control to verify that the
OSD appears on the video monitor. The words MENU MODE appear
on the front panel display and the configuration menu screen is
visible on the video monitor.
If the video signals do not match, and you press the menu key
on the remote control, the words
MENU MODE appear in the front
panel display and a blank screen remains on your video monitor.
Connecting the Home Theater Standard 7.1
to Your System,
continued
Step 5: Connect
Video Sources and
the Video Monitor,
continued
Step 6: Activating the
On Screen Display
(OSD)