Krell Industries 7.1 - Manual (Page 53)

Note
Krell Home Theater Standard 7.1 49
Use the fifth option on the main menu, CONFIGURE LEVEL ADJUSTMENT to
set trims, adjust modes, set the main volume limit, and set up zone 2
volume control.
Trims add a fixed positive or negative volume offset for devices with
different volume levels. After adjusting the volume trim, you can easi-
ly switch between these inputs without changes in volume levels.The
Home Theater Standard 7.1 uses two types of trims: master volume
trims and taste trims.
Master volume trims (device, analog, and music mode sub trim)
change the volume of all speakers at once. These master volume
trims are programmed, and do not change unless reprogrammed
through the menu.
Taste trims adjust individual speakers during playback. Use the level
buttons or keys to make adjustments. Taste trims are not pro-
grammed and are temporary.
The master volume control has a numerical range from 0 to 152, with 31 as
the Dolby reference level. The center loudspeaker, surround loudspeakers,
and subwoofer volume trims have a range of +/- 15 dB.
Select CONFIGURE LEVEL ADJUSTMENT from the main menu. The CONFIG-
URE LEVELS screen appears, with the cursor blinking at DEVICE TRIM.
System Configuration, continued
STEP 5
CONFIGURE LEVEL
ADJUSTMENT
KRELL HTS
-CONFIGURE LEVELS-
ᮣᮣ DEVICE TRIM ᮤᮤ
ANALOG INPUT TRIM
MUSIC MODE SUB TRIM
DTS NEO:6 CONTROL
PL II CONTROL
MAXIMUM VOLUME LIMIT
ZONE 2 LEVEL
Configure Levels Screen