Krell Industries 7.1 - Manual (Page 71)

CHANNEL SELECTION
System Configuration, continued
SAVING ROOM EQ SETUP
MEMORY
ACCESSING ROOM EQ
SETUP MEMORY
When the channel field is set to ALL, the ROOM EQ SETUP menu displays
the filter settings which apply to all channels and all of the channels
are filtered in the same manner. When the channel parameter selec-
tion is set to only one of the channels (L, C, R, LS, RS, LB, RB, S),
the filter settings apply to each of the channels individually.
The selection ALL overrides individually configured channels.
Your configurations take effect only when you press enter in the APPLY
field. APPLY allows you to hear the effect of the selections you have
made without leaving the menu, if you have a source device playing.
There are four selectable memories associated with the ROOM EQ
SETUP
menu. Values are saved automatically when you enter a selec-
tion.
Room EQ settings are stored in the Home Theater Standard 7.1
memory in the same manner as all of the other software settings, for
example the selections for loudspeaker setup and device configura-
tion. See Saving and Recalling Customized Settings and
Restoring the Factory Default System Settings, on page 67, for
more information.
When the Home Theater Standard 7.1 is in the operational mode,
access the saved EQ configurations by pressing the right (arrow) key
on the remote. Use the up and down (arrow) remote keys to scan
through the four memories and
OFF .
Exit the main configuration menu by pressing the menu key (82) on the
remote. The Home Theater Standard 7.1 is now in operational mode. Press
the right arrow directional key followed by the up and down directional keys
(75) to scroll through the four EQ memories and
OFF.
Krell Home Theater Standard 7.1 67
IMPORTANT
APPLYING YOUR
CONFIGURATIONS
Note