Krell Industries 7.1 - Manual (Page 51)

Krell Home Theater Standard 7.1 47
The final option on the CONFIGURE DEVICES menu is CONFIGURE TRIGGER.
This option allows you to customize the operation of the four remote
output 12 VDC (12 Volt trigger) connectors (54) on the back panel.
Select CONFIGURE TRIGGER from the CONFIGURE DEVICES menu. The CON-
FIGURE TRIGGER screen appears, with the cursor blinking at DVD.
Use the direction (81) and enter (84) keys to select the source
device, the trigger(s) you want to configure, and the mode and delay
for each trigger you select. The delay is only available when a trigger
is set to activate.
ALWAYS OFF
This trigger is not activated when the configured device is selected.
MAIN AND ZONE 2
The trigger activates when the configured device is selected for main
zone or zone 2 listening.
MAIN ONLY
The trigger activates only when the configured device is selected for
main zone listening.
ZONE 2 ONLY
The trigger activates only when the device is selected for zone 2 lis-
tening.
System Configuration, continued
Configure Trigger
Trigger Modes
KRELL HTS
-CONFIGURE TRIGGER-
MODE
ALWAYS OFF
ᮣᮣ
DVD
ᮤᮤ
TRIGGER 1
DELAY
N/A
Configure Trigger Screen