Krell Industries 7.1 - Manual (Page 66)

62 Krell Home Theater Standard 7.1
System Configuration, continued
Bass Peak Limiter Setup
Screen
When you select ON, the BASS PEAK LEVEL reverts to 0. Use the up
direction key to increase the output of the noise generator. Select the
volume level limit (0-90) by increasing the noise generator until the
bass sounds distorted. Then select that level, or slightly below.
After setting your selections, press the previous key once to return to
the
OPERATION
screen.
KRELL HTS
-BASS PEAK LIMITER SETUP-
ᮣᮣ
OFF
ᮤᮤ
N/A
BASS PEAK LIMITER
BASS PEAK LEVEL
The BASS PEAK LIMITER SETUP menu lets you turn the bass peak limiter
option
ON
or
OFF.
When this option is
ON,
you can then set the maxi-
mum amount of .1 (or LFE) and redirected bass that is sent to your
subwoofer. If you do not have a subwoofer, this option limits the max-
imum amount of 1 (or LFE) and redirected bass that is sent to your
full range front and/or surround loudspeakers.
Select
BASS PEAK LIMITER SETUP
from the
OPERATION
menu. The
BASS
PEAK LIMITER SETUP screen appears, with the cursor blinking at OFF.
Bass Peak Limiter Setup
How To Navigate the Menu
and Make a Selection
1. Use the direction keys to scroll
from line to line.
2. Press enter to select a line.
3. Use the direction keys to scroll
through options within a line.
4. Press enter to select and set
an option.
5. Use the direction keys to scroll
to the next line.