Krell Industries 7.1 - Manual (Page 68)

64 Krell Home Theater Standard
System Configuration, continued
Program Remote Screen A
Program Remote
KRELL HTS
-PROGRAM REMOTE-
USE FRONT PANEL UP
TO SELECT A COMMAND
SAVE SENDS COMMAND
AND RECALL EXITS MODE
REMOTE INPUT IS INACTIVE
ᮣᮣ
START
ᮤᮤ
The final item on the
OPERATION
menu,
PROGRAM REMOTE,
allows you to
program a learning remote control to operate the Home Theater
Standard 7.1.
The infrared sensor on the front panel is inactive until programming
is complete.
Select
PROGRAM REMOTE
from the
OPERATION
menu. The
PROGRAM
REMOTE
screens appears with the cursor blinking at
START.
After you press START, the following screen appears:
KRELL HTS
-PROGRAM REMOTE-
ONLY U AND D SAVE AND
RECALL ARE ALLOWED
ON FRONT PANEL. REMOTE
INPUT IS INACTIVE
Note
Program Remote Screen B
Note
Press the recall button (31)
on the front panel to return to
Program Remote Screen A.
Then press the previous key
on the Home Theater
Standard 7.1 remote control
to return to the operation
screen
.