Krell Industries 7.1 - Manual (Page 59)

Krell Home Theater Standard 7.1 55
System Configuration, continued
PLII Control Screen
KRELL HTS
-PLII CONTROL-
CENTER WIDTH
ᮣᮣ
0
ᮤᮤ
DIMENSION 3
DIMENSION
You can adjust the sound field toward the front or rear loudspeakers,
to achieve a more suitable balance from all loudspeakers with certain
recordings. The adjustment range is 0 (maximum surround) to 6
(maximum center). The default setting is 3 (neutral).
CENTER WIDTH
You can adjust how much of the center output signal is spread to the
left and right channel outputs. The adjustment range is from 0 (low-
est) to 7 (highest, effectively mutes the center channel).
After setting your selections, press the previous key once to return to
the
CONFIGURE LEVELS screen.
Use the PLII CONTROL menu to adjust the signal for Dolby Prologic II
music mode, which derives a 6.0 signal from two-channel material.
Select PLII CONTROL from the CONFIGURE LEVELS menu. The PLII CONTROL
screen appears, with the cursor blinking at the center width value.
PLII Control