Krell Industries 7.1 - Manual (Page 9)

Krell Home Theater Standard 7.1 5
Before you install the Home Theater Standard 7.1 into your system,
review the following guidelines to choose the location for the compo-
nent. This will facilitate a clean, trouble-free installation.
The Home Theater Standard 7.1 does not require any type of special
rack or cabinet for installation. For the dimensions of your Home
Theater Standard 7.1 see Specifications, on pages 80-81.
The Home Theater Standard 7.1 requires at least two inches (5 cm)
of clearance on each side and at least two inches (5 cm) of clear-
ance above and below the component to provide adequate ventila-
tion. In addition, the Home Theater Standard 7.1 requires at least
three inches (7 cm) of clearance between other connected compo-
nents. For installations inside cabinetry, extra ventilation may be nec-
essary.
The Home Theater Standard 7.1 has superb regulation and does not
require a dedicated AC circuit. Avoid connections through extension
cords or multiple AC adapters. High quality 15 amp grounded AC
strips are acceptable.
High quality AC line conditioners or filters may be used if they are
grounded and meet or exceed the unit’s power supply rating of 100
VA. Contact your authorized Krell dealer, distributor, or Krell before
using any devices designed to alter or stabilize the AC power for the
Home Theater Standard 7.1.
The Home Theater Standard 7.1 should be used only with the power
cord supplied.
Placement
AC POWER
GUIDELINES