Krell Industries 7.1 - Manual (Page 74)

Saving and Recalling Customized Settings and
Restoring the Factory Default System Settings
70 Krell Home Theater Standard 7.1
To save the customized settings that you have entered, press and
hold the save button (29) for approximately four seconds. The front
panel displays
SAVING SETUP
while the settings are being stored in the
nonvolatile memory of the Home Theater Standard 7.1.
To retrieve your system’s saved settings, press and hold the recall
button (31) for approximately four seconds. The front panel displays
RECALL SETUP while the settings are being retrieved from the Home
Theater Standard’s nonvolatile memory. Any settings that have been
saved will be available through recalling system setup.
To replace all system settings with the factory default settings, follow
these steps:
1. Press the front panel power button (1) to put your system into the
operational mode.
2. Simultaneously press the recall button (31) and the power button (1).
The front panel displays:
PLEASE WAIT
INITIALIZING
Your customized settings for the Home Theater Standard 7.1 revert
to the factory default settings.
If you save your settings, they are still in memory after you restore the factory
default system settings. Follow Recalling Customized Settings above to
retrieve your customized settings.
SAVING CUSTOMIZED
SETTINGS
RESTORING
THE FACTORY DEFAULT
SYSTEM SETTINGS
RECALLING
CUSTOMIZED
SETTINGS
Note