Krell Industries 7.1 - Manual (Page 42)

38 Krell Home Theater Standard 7.1
The third option on the main menu screen,
CALIBRATE VOLUME,
allows
you to calibrate each channel using the internal noise generator of
the Home Theater Standard 7.1, either automatically, manually, or by
listening to external program material.
A sound pressure level (SPL) meter is required for this procedure.
Select CALIBRATE VOLUME on the MAIN MENU. The CALIBRATE ROOM SETUP
screen appears, with the cursor blinking at AUTO NOISE SEQUENCE.
Press the enter key to choose
AUTO NOISE SEQUENCE.
The
AUTO
CALIBRATION screen appears, with the cursor blinking at the left loud-
speaker sound level.
System Configuration, continued
Calibrate Room Setup Screen
Auto Noise Sequence
Auto Calibration Screen
Note
KRELL HTS
-CALIBRATE ROOM SETUP-
SELECT THE CALIBRATION
METHOD
ᮣᮣ AUTO NOISE SEQUENCE ᮤᮤ
MANUAL NOISE SEQUENCE
PROGRAM MATERIAL
KRELL HTS
-AUTO CALIBRATION-
LEFT
ᮣᮣ 0 DB
ᮤᮤ
L SURR
0 DB
L BACK
0 DB
CENTER
0 DB
SUB
0 DB
C BACK
N/A
RIGHT
0 DB
R SURR
0 DB
R BACK
0 DB
STEP 3
CALIBRATE VOLUME
How To Navigate the Menu
and Make a Selection
1. Use the direction keys to scroll
from line to line.
2. Press enter to select a line.
3. Use the direction keys to scroll
through options within a line.
4. Press enter to select and set
an option.
5. Use the direction keys to scroll
to the next line.