Krell Industries 7.1 - Manual (Page 38)

34 Krell Home Theater Standard 7.1
The Home Theater Standard 7.1 is shipped with factory default selec-
tions in the configuration menus. For maximum performance, the
Home Theater Standard needs to be configured for each system
device, its capabilities, and loudspeaker positions in the listening room.
To save your new configuration menus, or revert to the factory
defaults, see Saving and Recalling Customized Settings, and
Restoring the Factory System Settings, on page 70.
Krell recommends configuring your system step-by-step, in the
sequential order described below. Enter information into the Home
Theater Standard 7.1 through the interactive on-screen menus.
These menus are structured to guide you through the setup process
for each device, or for your entire surround sound system.
Make sure that any source devices are off when you configure the
Home Theater Standard 7.1.
System Configuration
Press the menu key. The front panel display reads
MENU MODE.
The
MAIN MENU screen appears with the cursor blinking at CONFIGURE
SPEAKERS.
ACCESSING
THE MAIN MENU
Main Menu Screen
KRELL HTS
-MAIN MENU-
ᮣᮣ CONFIGURE SPEAKERS ᮤᮤ
LISTENING ROOM SETUP
CALIBRATE VOLUME
CONFIGURE DEVICES
CONFIGURE LEVEL ADJUSTMENT
OPERATION
IMPORTANT
How To Navigate the Menu
and Make a Selection
1. Use the direction keys to scroll
from line to line.
2. Press enter to select a line.
3. Use the direction keys to scroll
through options within a line.
4. Press enter to select and set
an option.
5. Use the direction keys to scroll
to the next line.