Krell Industries 7.1 - Manual (Page 50)

46 Krell Home Theater Standard 7.1
Select DIGITAL from the ASSIGN AUDIO INPUTS screen. The ASSIGN DIGITAL
AUDIO INPUTS screen appears, with the cursor blinking at DVD.
Use the direction and enter keys to scroll through and select the digi-
tal device you want to configure, select the analog input, and choose
the default mode for the four digital signal sound formats:
DOLBY
DIGITAL 2.0, DOLBY DIGITAL 5.1, DTS 5.1, and PCM. Each of these signals has
options under DEFAULT MODE. If a THX Surround EX or DTS ES encod-
ed disc is played, the Home Theater Standard 7.1 will automatically
select one of these modes.
The digital input must be set to DISABLED to use the analog input for the
main zone.
The digital input must be DISABLED to use preamp mode.
PREVIOUS holds the last selected digital input.
When the device is configured, press the previous key twice to return
to the
CONFIGURE DEVICES menu.
System Configuration, continued
Assign Digital Audio
Inputs
KRELL HTS
-ASSIGN DIGITAL AUDIO INPUT-
DEVICE
ᮣᮣ
DVD
ᮤᮤ
COAX 1
INCOMING SIGNAL
DOLBY D 5.1
DEFAULT MODE
DOLBY D 5.1
Notes
Assign Digital Audio
Input Screen
How To Navigate the Menu
and Make a Selection
1. Use the direction keys to scroll
from line to line.
2. Press enter to select a line.
3. Use the direction keys to scroll
through options within a line.
4. Press enter to select and set
an option.
5. Use the direction keys to scroll
to the next line.