Krell Industries 7.1 - Manual (Page 73)

Krell Home Theater Standard 7.1 69
System Configuration, continued
Room EQ Setup
continued
Note
TYPE
Navigate to
TYPE,
and configure one, two, or all of the three bands
(I, II, III) for
FREQ, SHAPE,
and
LEVEL.
It is not necessary to configure all three filters, you may configure only one
or two filters.
Some parameters may be adjusted, depending on the filter type selected.
APPLY
Select
APPLY
and set the selection, if you want to hear your configura-
tion. The Room EQ Setup configurations you have just selected are
audible if you have a source playing.
After selecting the appropriate loudspeaker configurationfor your sys-
tem, press the previous key twice to return to the main configuration
menu.
Exit the main configuration menu by pressing the menu key on the
remote. The Home Theater Standard 7.1 is now in the operational
mode.
How To Navigate the Menu
and Make a Selection
1. Use the direction keys to scroll
from line to line.
2. Press enter to select a line.
3. Use the direction keys to scroll
through options within a line.
4. Press enter to select and set
an option.
5. Use the direction keys to scroll
to the next line.