Lincoln Electric INVERTEC SVM129-B - Manual (Page 97)

SWITCH BOARD
REPLACEMENT
Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician or
machine operator and will invalidate your factory warranty. For your safety and to avoid elec-
trical shock, please observe all safety notes and precautions detailed throughout this manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical troubleshoot-
ing assistance before you proceed. Call 1-888-935-3877.
DESCRIPTION
This procedure will aid the technician in the removal and replacement of the Switch Boards.
MATERIALS NEEDED
5/16" Nut driver
7/16" Wrench
3/16" Allen type wrench
3/16" Socket wrench
Dow Corning 340 Heat Sink Compound (Lincoln E1868)
ANALOG Ohmmeter
TROUBLESHOOTING & REPAIR
F-59 F-59
INVERTEC® STT® & STT® II
WARNING
Note: Component locations and disassembly procedures may
vary slightly on STT II models
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC