F-28, Troubleshooting and repair, Warning – Lincoln Electric LN-8 SVM132-A User Manual
Page 78
F-28
TROUBLESHOOTING AND REPAIR
F-28
LN-8
MATERIALS NEEDED
5/16 in. nutdriver
3/32 in. wrench
Jewelers’ flat blade screwdriver
Soldering iron and solder
GROUND LEAD PROTECTOR PUSH BUTTON
SWITCH REPLACEMENT
Service and repair should be performed only by Lincoln Electric factory trained per-
sonnel. Unauthorized repairs performed on this equipment could result in danger to
the technician or the machine operator and will invalidate your factory warranty. For
your safety and to avoid electrical shock, please observe all safety notes and precau-
tions detailed throughout this manual.
If for any reason you do not understand the test procedures or are unable to perform
the tests/repairs safely, contact the Lincoln Electric service department for technical
troubleshooting assistance before you proceed.
Call (800) 833-9353 (WELD).
_____________________________________________________________
WARNING
This procedure takes approximately 10 minutes to perform.