Troubleshooting and repair, Wire drive assembly and component replacement – Lincoln Electric LN-8 SVM132-A User Manual
Page 88
F-38
TROUBLESHOOTING AND REPAIR
F-38
10. Using a 1/2 in. wrench, remove the
four hex head screws, lockwash-
ers and flat washers that hold the
mounting plate to the gear box
assembly, and remove the mount-
ing plate and insulation sheet.
Refer to Figure F.13.
11. Using a flat blade screwdriver,
remove the three screws, lock-
washers, flat washers and spacers
that secure the drive motor to the
gearbox assembly, and remove
the drive motor.
12. For further disassembly of the wire
drive assembly, refer to Figure
F.13.
13. Secure the drive motor to the gear-
box assembly using three screws,
lockwashers, flat washers, and
spacers.
LN-8
WIRE DRIVE ASSEMBLY AND COMPONENT REPLACEMENT
(continued)
FIGURE F.13 – WIRE DRIVE ASSEMBLY REMOVAL
BRUSH
SCREW
BRUSH
WIRE
DRIVE
MOTOR
GEARBOX
INSULATION
SHEET
MOUNTING
PLATE