Troubleshooting and repair, Repair procedure – Lincoln Electric LN-8 SVM132-A User Manual
Page 79
Advertising
F-29
TROUBLESHOOTING AND REPAIR
F-29
REPAIR PROCEDURE
1. Using the 5/16 in. nutdriver,
remove the screws from the left
side cover assembly.
2. Using the 3/32 in. wrench and jew-
elers’ flat blade screwdriver,
remove the ground lead protector
switch from the switch mount.
Refer to Figure F.8.
3. Remove insulation and unsolder
the two leads from the ground lead
protector switch.
4. Solder the two leads onto the
new switch and reinsulate the
connections.
5. Place the switch onto the switch
mount and install the screws, flat
washers, lockwashers and nuts
that secure the switch into place.
6. Install the screws that secure the
left side cover assembly.
LN-8
GROUND LEAD PROTECTOR PUSH BUTTON
SWITCH REPLACEMENT
(continued)
Advertising