Land Rover DEFENDER LT77S - Manual (Page 14)

MANUALGEARBOX DEFENDER
9. Fit oil seal to housing, lip side leading, using
18G 1422. Apply SAE 40 oil to lip.
10. Assemble gears to oil pump and fit cover.
GEAR CHANGE HOUSING
1. With a length of tube, release the bias spring
from adjusting screws.
2. Remove bias spring adjusting screws.
3. Drive-out roll pin to remove bias spring.
4. Remove gear lever extension from lower gear
lever.
Remove bolt and special washer to remove
lower gear lever.
WARNING: Hold the nylon spring loaded
causing personal injury.
pad while removing the t o prevent it
6. Remove gear selector housing from remote
housing.
OVERHAUL