Land Rover DEFENDER LT77S - Manual (Page 34)

MANUAL GEARBOX DEFENDER
10. Secure tool " A" to gear and gear case and
using a suitable torque wrench tighten the nut
to the correct torque.
FIFTH GEAR SELECTOR FORK ASSEMBLY
1. Fit fifth gear selector fork bracket.
Fit the fifth gear spool long end towards centre
plate.
Using a round nose punch, form the collar into
the layshaft slots.
3. Fit slippers to selector fork.
4. Fit fork to synchromesh and secure with pins
and "E" clips.
NOTE: Before fitting pins and clips cover
holes in centre plate to prevent them
falling into casing.
5. Engage tongue of spool in selector fork.
6. Fit oil pump drive to layshaft.