Land Rover DEFENDER LT77S - Manual (Page 35)

. .
.f.
. ....
,
..
. .
MANUAL GEARBOX
EXTENSION CASE
1. Release centre plate from workstand and fit
gasket on joint face.
2. Fit extension case while aligning oil pick-up
pipe. Remove guide studs and secure to main
case.
NOTE: Do not use force, if necessary
remove case and re-align oil pump drive
if case does not fit first time.
CAUTION: To protect "0" ring while
fitting, cover mainshaft splines with
smooth tape.
3. Fit "0" ring to mainshaft groove.
4. Fit "0" ring collar to mainshaft using 18G 1431
'3221 M
U 7
OVERHAUL