Land Rover DEFENDER LT77S - Manual (Page 22)

MANUALGEARBOX
DEFENDER
INPUT SHAFT
1. Examine the gear and dog teeth for wear and
2. Polish oil seal track if necessary.
3. Using 18G 284 AAH and 18G 284 remove pilot
damage.
bearing track.
\
4. Using 18G 47BA and MS 47 remove taper
bearing.
6. Using Press M S 47, Collets 18G 478 and
adaptor 18G 47 fit a new taper bearing.
NOTE: ensure that the bearing is
supported by the lip inside 18G 47 BA.
MAINSHAFT
1. Examine bearing journals for wear and scores.
2. Check condition of circlip grooves.
3. Examine splines for wear and damage.
4. Use an air line to check that the main oil feed
from the pump is clear and feed to spigot
bearing.
5. Check oil feed holes to roller bearings are clear.
3
.. .
,
.
5. Support the shaft under MS 47 and press in a
new track.
M