Land Rover DEFENDER LT77S User Manual
Page 26
Advertising
MANUAL GEARBOX
DEFENDER
CAUTION: Ensure that the slots in the
baulk ring align with the synchromesh
slippers while pressing on the bearing.
5.
Invert mainshaft and press assembly back
against circlip.
7.
mainshaft in
rear end downwards
and fit second gear needle roller, and second
gear.
8. Fit third gear bush.
9.
Fit third gear needle
rollers.
10.
Fit third gear.
11.
Fit third gear baulk ring.
MS
5
NOTE: Instruction
5 is
necessary since it
is probable that when pressing on the
bearing it will have clamped the first gear
bush preventing
it
from turning.
6. Reposition mainshaft in vice and using a screw
driver blade check that the first gear bush is
free to turn.
Third-fourth synchomesh assembly
22
I
OVERHAUL
Advertising