Land Rover DEFENDER LT77S - Manual (Page 29)

MANUAL GEARBOX
..
Assembling selectors. ASSEMBLING GEARBOX SHAFTS TO CENTRE
PLATE
Fitting gears to centre plate
7. Rest first-second fork and shaft assembly on
bench and locate pin in jaw of fork.
8. Fit interlock spool and third-fourth fork and
engage spool in jaw of fork. 1. Secure centre plate to workstand, fit bearing
tracks and inboard detent ball and spring.
8 7
9. Slide spool and fork towards first- second
selector until slot in
spool locates over pin
keeping the spool engaged in third-fourth fork
jaw.
2. Check both synchromesh units are in neutral
and fit selector shaft assembly.
3. Fit mainshaft and selectors to centre plate and
align pin with slot in plate.