Laser beta lasermike LS8000-3 - Manual (Page 7)

LaserSpeed 8000-3 Instruction Handbook
Proprietary Statement
Part No. 93463 / Drawing No. 0921-01561 Page 7 of 221 Revision A (Sep 2007)
Proprietary Statement
Manufacturer/Distributor
Beta LaserMike Inc, 8001 Technology Blvd, Dayton, OH 45424, USA
About This Manual
This manual contains descriptions, drawings, and specifications for a Beta LaserMike product. Equipment or products made prior to or
subsequent to the publication date of this manual may have parts, features, options, or configurations that are not covered by this manual.
Specifications contained herein are subject to change by Beta LaserMike without prior notice. Beta LaserMike is not responsible for errors or
omissions that may be contained herein or for incidental or consequential damages in connection with the furnishing or use of this information.
Comments or suggestions for possible improvements to the manual are appreciated. Please email us at
[email protected] .
The information contained in this manual is the property of Beta LaserMike. The information disclosed in this document is furnished in confidence
and upon the condition that individual and corporate intellectual rights, whether patented or not, will be respected. If this document is supplied on
removable media (e.g. CD), an electronic copy (stored on-site) and one printout is permitted. If this document is supplied in printed form, no part
of this document may be reproduced or scanned without the prior written consent of Beta LaserMike. This document may not be distributed or
circulated to third parties.
Limited Warranty
Beta LaserMike will correct by repair, or at Beta LaserMike‘s option, by replacement, F.O.B Beta LaserMike’s plant, any defect in workmanship or
material in any equipment manufactured by Beta LaserMike which appears under normal and proper use within twelve months from the date of
shipment (eighteen months for OEM’s), provided Beta LaserMike is given reasonable opportunity to inspect the alleged defective equipment at
the place of its use and under conditions of its use.
EXCLUSIONS: This warranty does not cover products which have been modified, altered, or repaired by any other party than Beta LaserMike or
its authorized agents. Furthermore, any product which has been, or is suspected of being damaged as a result of negligence, misuse, incorrect
handling, servicing, or maintenance; or has been damaged as a result of excessive current/voltage or temperature; or has had its serial
number(s), any other markings, or parts thereof altered, defaced, or removed will also be excluded from this warranty.
WARRANTY SERVICE AT CUSTOMER SITE: Warranty service performed at the customer’s facility will be free of charge for parts and labor;
however, the customer will be liable for transportation and living expenses of personnel dispatched to effect such repair. A purchase order or
other written confirmation of the acceptance of these charges, signed by an authorized individual, will be required prior to commencement of
repairs. Additional charges may be assessed the customer if: 1) The equipment is not made available on a timely basis, 2) The equipment is
found to be without fault, and/or 3) It is determined the equipment is not under warranty, whether by expiration of the warranty or any act which
voids the warranty.
OTHER THAN AS SET FORTH HEREIN, BETA LASERMIKE MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, OF MERCHANTABILITY
AS TO THE EQUIPMENT MANUFACTURED BY IT, AND THERE ARE NO EXPRESSED OR IMPLIED WARRANTIES WHICH EXTEND
BEYOND THE DESCRIPTION ON THE FACE THEREOF. Beta LaserMike’s obligation to correct defects in such equipment by repair or
replacement in accordance with the foregoing provisions is in lieu of any other warranties, expressed or implied, and in no event shall Beta
LaserMike be liable for incidental or consequential damages. No service of Beta LaserMike’s equipment is permitted during the warranty period
without the specific written consent of Beta LaserMike.
Service
Your instrument was carefully inspected electrically and mechanically prior to shipment. It should be free of surface mars and scratches, and it
should be in perfect working order upon receipt. If any indication of damage is found, file a claim with the carrier immediately, prior to using the
instrument. If no damage is apparent, proceed by using this manual to install and setup this instrument.
Save the shipping carton and packing material for future storing or shipment of the instrument. If, at some future time, the instrument must be
returned to the factory for service, include a full description of the instrument failure and the mode of operation the instrument was in at the time
of failure. Also include a contact person to discuss the instrument failure.
When returning the instrument to Beta LaserMike, first contact your local Beta LaserMike Service Department for a Return Material Authorization
(RMA). The RMA number is needed for proper handling of returned equipment. Ship the instrument in the original carton, or, if the original carton
is unavailable, ship in a carton providing sufficient protection. Send the instrument to the Asia, Europe, or USA office (addresses listed on the
outside cover of this manual), whichever is closest to you or to the office indicated by your sales engineer. Place the RMA number on the outside
of the carton, and include a purchase order number and any other information specific to your instrument. Field warranty service is available, if
the customer pays travel expenses by advance purchase order. All service operations should be performed by skilled electronics technicians,
who have been trained by Beta LaserMike.