Laser beta lasermike LS8000-3 - Manual (Page 99)

LaserSpeed 8000-3 Instruction Handbook
LaserTrak Software
Part No. 93463 / Drawing No. 0921-01561 Page 99 of 221 Revision A (Sep 2007)
Chart Recorder Screen
Gauge Info
Length (m) – the length on the LaserSpeed gauge’s length counter. The
length is accumulation from the last time the gauge was reset.
Length is displayed in the units set during gauge
Configuration.
Vel (m/min) – the instantaneous speed measured by the LaserSpeed
gauge. The speed is displayed in the units set during gauge
Configuration.
QF- the instantaneous Quality Factor measured by the LaserSpeed
gauge. QF is displayed as a number between 0 and 15,
where 15 represents the best and 0 represents no
measurements being made.
Average QF- the average of all the QF readings since the LaserTrak
software started acquiring data from the gauge. This value is