Lucent Technologies AT&T 7400B - Manual (Page 65)

APPENDIX A: AT COMMAND SET
DEFINITY Communications System
7400B Data Module
Page A-18
User’s Guide
Command: &Z
Function: Store a telephone number.
Type: immediate
Arguments: The &Z command accepts one of four arguments (0 through 3), which
designates the memory location in which the dialing string that follows
the command will be stored.
S-Register: none
Example: at&z2=555-1212 [ Enter ]
Comments: In the example, the dial string 555-1212 is stored in memory location
2. Each of the four number storage locations can store a maximum of
25 characters.
See Also: Chapter 4, “Operation and Configuration.”