Command in this appendix; s2 and s12 in – Lucent Technologies AT&T 7400B User Manual
Page 73
Advertising
APPENDIX B: S-REGISTERS
DEFINITY Communications System
7400B Data Module
Page B-8
User’s Guide
Register:
S11
— not used
Register:
S12
Description:
The value in this S-register determines the minimum delay required
immediately before and after entering the escape sequence (guard
time). It also determines the maximum interval allowed between
entering each of the three consecutive characters of the sequence.
Range of
Value may be 000 through 255 fiftieths (0.02) of a second; factory-
Values:
default value is 050 fiftieths of a second (1 sec.).
Storable:
no
Comments:
If the value in this S-register is set to 0, timing is not a factor in escape
sequence recognition.
See Also:
Chapter 4, “Operation and Configuration.”
Register:
S13
— not used
Advertising