Lucent Technologies AT&T 7400B - Manual (Page 68)

DEFINITY Communications System APPENDIX B: S-REGISTERS
7400B Data Module
User’s Guide Page B-3
Label Description
(Contd.)
Storable: A yes after this label indicates that the contents of this S-register will
be written when the current configuration profile is saved to one of the
two configuration profile storage locations. A no here indicates that
the contents of the S-register will not be written to storage.
Note: Any changes to non-storable S-registers are lost when
power is removed from the Data Module; however, the
&Y
command can be set to load a specific stored configuration
profile at start up, and the values set by AT command
arguments in the recalled profile will be placed into effect.
Comments: Additional information about the S-register is presented following this
label.
See Also: Following this label are references to other parts of this manual where
you will find more information, and/or a list of other S-registers or AT
commands that are associated with this S-register.