Rear, Plastic nut 5/16" mounting screws, Troubleshooting & repair – Lincoln Electric INVERTEC SVM158-A User Manual
Page 138
Advertising
PROCEDURE
1. Remove input power to the V350-PRO.
2. Using a 5/16” nut driver remove the case wrap-
around cover.
3. Perform the Input Filter Capacitor Discharge
Procedure detailed earlier in this section.
4. Using a 5/16” nut driver remove the four screws
from the bottom and right side of the rear assem-
bly. See Figure F.40.
TROUBLESHOOTING & REPAIR
CURRENT TRANSDUCER REMOVAL AND REPLACEMENT (continued)
F-88
F-88
V350-PRO
O F F
O F F
O F F
Plastic
Nut
5/16" Mounting Screws
REAR
FIGURE F.40. – CASE BACK SCREW LOCATIONS
Advertising