Perform the power board test, Perform the power board, Test – Lincoln Electric INVERTEC SVM158-A User Manual
Page 75: Troubleshooting & repair, Power board test, Warning
F-25
F-25
V350-PRO
TROUBLESHOOTING & REPAIR
POWER BOARD TEST
Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician or
machine operator and will invalidate your factory warranty. For your safety and to avoid
electrical shock, please observe all safety notes and precautions detailed throughout this
manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical
troubleshooting assistance before you proceed. Call 1-800-833-9353 (WELD).
DESCRIPTION
This test will help determine if the power board is receiving the correct voltages and also if
the power board is regulating and producing the correct DC voltages.
MATERIALS NEEDED
Volt-Ohmmeter
5/16” Nut Driver
Wiring Diagram
WARNING
This procedure takes approximately 30 minutes to perform.