Line 6 3.7 - Manual (Page 137)

Line 6 GearBox 3.7 – GearBox Plug-In
7•5
GearBox Plug-In Controls and Operation
The GearBox Plug-In Graphical User Interface or GUI (you guessed it, it’s pronounced “gooey”) is
remarkably similar to that of the GearBox application, so we invite you to refer to the GearBox Stand-
Alone Application section for a description of all the controls and functions. In this section, we’ll
point out the differences between the Plug-In and its full-version brother.
Only a single tone path per Plug-In instance -
you can load multiple instances of the Plug-In
within your host session
Click here for
Plug-in help
VU-Meters always show the
GearBox Plug-In Output
level
Sets the level sent to the audio track
(or into the next Plug-in)
Attenuates the level of the
signal fed into the Plug-in
You can create Tones within the Plug-In, which you can save for later recall, or you can use any of
the GearBox application Tones*. GearBox Plug-In Tones are totally compatible with its full-version
counterparts, and all Tones are stored in one convenient folder on your hard drive (the default location
is My Documents/Line 6/Tones/GearBox on Windows ® , and Documents/Line 6/Tones/GearBox on
Mac ® ).
*Note to POD X3/POD X3 Live/POD X3 Pro: Since the GearBox Plug-In does not support Dual
Tone configurations, your POD X3 Dual Tone presets will not be available in the Plug-In Tone
menu. You can load any Single Tone preset created by POD X3, as well as any other Single Tone
preset created for GearBox by any other Line 6 USB device.