Line 6 3.7 User Manual
Page 61
Line 6 GearBox 3.7 – Driver Panel & Recording
3•17
*It is recommended that you do not use the Sample Rate selector in the Mac Audio-MIDI Setup
dialog to set your sample rate when your recording software is running. Typically, your recording
software will offer a Sample Rate option within its own “Preferences” or “Audio Setup” settings. It is
best to configure the Sample Rate within the recording software, and you will see the device’s sample
rate switch automatically to match it.
5d – Volume sliders (audio input):
These sliders 1 - 12 are not functional with UX8 - use the GearBox Record Send knob and/or Tone
volume instead of using these sliders to set your Record Send levels for Line 6 devices.
5e – Audio Output:
The
•
Format selectors show you the Sample Rate* and Bit Depth that the TonePort UX8 is
operating at for playback. The Bit Depth for all Line 6 devices is fixed at 24 bit.
*It is recommended that you do not use the Sample Rate selector in the Mac Audio-MIDI Setup
dialog to set your sample rate when your recording software is running. Typically, your recording
software will offer a Sample Rate option within its own “Preferences” or “Audio Setup” settings. It is
best to configure the Sample Rate within the recording software, and you will see the device’s sample
rate switch automatically to match it.
5f – Volume sliders (audio output):
These sliders are not functional for Line 6 hardware - use the GearBox Out To Monitor controls (or
the Volume knobs on your Line 6 hardware) instead of these sliders to adjust output levels.