Line 6 3.7 - Manual (Page 53)

Line 6 GearBox 3.7 – Driver Panel & Recording
3•9
The Inputs & Recording tab lets you select specific inputs for recording. Input source options are as
follows:
Input 1: Instrument 1 or XLR 1 or Line 1 or S/PDIF (L)
Input 2: Instrument 2 or XLR 2 or Line 2 or S/PDIF (R)
Input 3: XLR 3 or Line 3
Input 4: XLR 4 or Line 4
Input 5: XLR 5 or Line 5
Input 6: XLR 6 or Line 6
Input 7: XLR 7 or Line 7
Input 8: XLR 8 or Line 8
You can also link inputs into stereo pairs. This affects
hardware monitoring controls in the Outputs &
Monitoring tab (see below).
Using Inputs 1 & 2 with the GearBox standalone application
The GearBox standalone application works with the TonePort UX8 driver to provide ultra-low latency
via ToneDirect™ monitoring for Inputs 1 & 2 of the UX8, which includes two high-Z Instrument
inputs, two XLR inputs, two Line level inputs and stereo S/PDIF input. GearBox’s ToneDirect™
Monitoring is ideally suited for recording guitar and bass with amp and effects processing, providing
the instantaneous feel necessary for competent performance while tracking.
ASIO Record Sends
This box displays the ASIO names of the UX8’s input sources as they appear in recording applications
utilizing the UX8’s ASIO driver.
Sends 9-10 and 11-12 represent processed and semi-
processed signals respectively, from the GearBox
standalone application. If GearBox is not running,
Sends 9-10 and 11-12 carry the signal from Input 1.
See the GearBox Standalone Application chapter for details on using the GearBox sends with the
TonePort UX8.