Line 6 3.7 - Manual (Page 54)

Line 6 GearBox 3.7 – Driver Panel & Recording
3•10
Hardware Meters Show
Use this menu to select the input and output
levels you want the UX8’s hardware meters to
display.
Clock Source
Set your preferred TonePort UX8 clock source with
this menu. Select S/PDIF to sync the UX8 to S/PDIF
clock source from another device’s digital output.
Outputs & Monitoring Tab (TonePort UX8 Only - Windows)
Important: Note that the Outputs & Monitoring tab provides control over the volume of whatever
you are inputting into UX8. These controls do not affect Send levels (the audio that streams into
your recording software), nor do they control the level of audio coming from your computer (such as
the playback level of your software’s session). In other words, volume and pan levels here are purely
analog, intended for monitoring live input levels (from instruments, mics, etc) to provide you with
independent level control over these items versus the playback levels of your audio software’s tracks.