Line 6 3.7 - Manual (Page 76)

Line 6 GearBox 3.7 – GearBox Stand-Alone Application
4•6
22 - Show/Hide Effects display button: Click this button to collapse or expand the area which shows
the Effects Control display and Record Send 1-2 controls.
For TonePort UX8 only – Note that UX8 hardware meters are configured in the Line 6 Audio-
MIDI Devices application, Inputs & Recording tab.
23 - Hum Reducer feature:
TonePort & GuitarPort – Use this feature to eliminate that annoying hum that guitars sometime
have, especially when in front of computer monitors. Click the Hum Reducer button to walk
through the use of this feature:
Note 1 – GearBox will not display the Hum Reducer options when a PODxt is the source device.
Note 2 – The Hum Reducer is for Instrument Input 1 only. Hum Reducer is not available for Mic, Line
or Digital input.
GearBox with TonePort and GuitarPort
Using GearBox with a TonePort or GuitarPort device gives you access to multiple Record Sends, and
with a TonePort UX1/UX2/UX8/KB37, you get Dual-Tone operation, bringing out the most out of