Line 6 3.7 User Manual
Page 62
Line 6 GearBox 3.7 – Driver Panel & Recording
3•18
Line 6 Audio MIDI Settings Dialog - Inputs & Recording Tab
1 – Input Source Select: This is a mirrored control for the Source Select within the GearBox application
where it allows you to select which physical input is used on the device. Note that this control is ONLY
selectable when the GearBox software is not in use by the current device. When GearBox is in use, this
selector remains grayed out, but displays the current Source that is selected within GearBox.
When GearBox is not launched, this Input Source Select, like the Source Select in the GearBox
application, offers a list of input options. The options will differ depending on the Line 6 device.
TonePort UX2 displays the following:
When GearBox is not in use,
the Input Source Select menu is
available. As shown here, TonePort
devices offer several input Sources
to choose from. The selected
Source is what gets routed to the
Device Sends.