Line 6 3.7 - Manual (Page 72)

Line 6 GearBox 3.7 – GearBox Stand-Alone Application
4•2
GearBox Controls and Operation
11
12
13
14
15
16
23
22
21
20
1 2 3 4 5 6 7 8 9 10
19 18 17
All descriptions that follow are the same for Windows ® or Mac ® , unless otherwise noted.
1 – Source Select menu:
TonePort UX1, UX2, UX8, KB37 – Here is where you choose which physical input(s) you want
to use for the GearBox Tone path. Note that TonePort devices also offer a Dual-Tone Source option.
See the next Dual-Tone section for more about this.
TonePort DI, GX, GuitarPort, PODxt – No Source Select is shown since these units offer only
one input.
2 - Show/Hide button: Clicking this button collapses or expands the viewable height of the Amp and
Effects controls. It’s useful to collapse these controls if you want to maximize the size of only the lower
Browser window.
3 - Tone Menu: Click here to choose from all saved Tones – when you create and save your own
masterpiece Tones, they’ll appear here too.
4 - Amp Model menu: Choose from all available Amp Models available for your connected device.
Remember, you can add more models with optional Model Packs from the Line 6 store !
5 - Cab Model menu: Choose from a huge assortment of speaker cabinets. We’ve pre-chosen cabs to
match up with your selected amp, but you can choose the Cab here independently - a different cab can
make a huge difference on the sound, so try a few different ones!