Line 6 3.7 User Manual
Page 89
Line 6 GearBox 3.7 – GearBox with POD X3
5•4
you click...
Click here to show the effect’s edit display
Click here to enable/disable the effect
Clicking on the top portion
•
of each of the little amp or “stomp box” icons in this row will toggle
the lower Effects Panel to display that effect block’s controls. You can do this independently of
switching the effect itself On/Off. Note that you can use your left or right mouse button to do
this.
Clicking the bottom portion
•
of the icon will toggle the effect On and Off.
Amp Enable Disable
•
- Clicking anywhere on the Amp icon toggles the Amp & Cab blocks
between enabled/disabled. Note that with the Amp & Cab disabled, the Volume knob is still
adjustable to allow you to set your (dry) signal level. Hey, sometimes naked is good!
With Amp & Cab in the disabled state, the Volume is still adjustable
Amp & Cab Enable/Disable toggle
TIP - You can also independently choose “No Amp” in the Amp Model menu or “No Cabinet” in
the Cab Model menu if you want only one or the other applied to your Tone.
Variax (POD X3 Live & Pro only)
•
- Clicking on the Variax icon displays the Variax settings
panel below. You can choose the Variax Model and Variax Type, as well as adjust the Tone for
your connected Variax - or, you can choose “Don’t Control” in the Variax Model menu to
prevent the onboard guitar settings from being changed by the Tone preset. These settings can
then be saved with your Tone presets so that you can recall both your Variax + full Tone settings
later. Please refer to the following
section for more info. Note that the Variax
icon does not include an “On/Off” switch - your connected Variax signal is automatically “on”
whenever you select Variax as one of your Tone 1 or Tone 2 Inputs (see item
*Note - To allow your connected Variax to be controlled by these GearBox Variax panel settings,
you’ll need to set the Variax Global Control option to “Enable” - this option is in the POD X3 Live/
Pro’s Input screen. Please also see the following