What is wah, What is the “! “ warning triangle – Line 6 3.7 User Manual
Page 221
Line 6 GearBox 3.7 – Glossary (What Is...?)
10•37
can be set “Pre” or “Post” in the signal chain.
POD X3 family devices only - With a POD X3 device connected, the Volume panel in GearBox
offers a Pre/Post switch, Min Volume and Max Volume controls, which are the same parameters you’ll
see on your POD X3’s on-board edit screen for the Volume block.
The Vol and other effects are described in detail in the
.
What is Wah?
Wah is one of GearBox’s Effects, and there are two different Wah models to choose – the Vetta Wah,
and the Weeper. Both are designed after classic wah pedals, and can be used to provide a “parked wah”
sound, or can be controlled via MIDI for wah pedal effects.
Many of the effects are modeled after classic gear described in the
What is the “! “ Warning Triangle?
This warning icon will show at the bottom right of the GearBox application window if some
aspect of your computer’s setup appears to be incompatible with GearBox, or your hard disk space runs
low.