Lincoln Electric POWER FEED 10M SINGLE/DUAL SVM172-A - Manual (Page 94)

POWER FEED 10M SINGLE/DUAL
ACCESSORIES
CC-4 CC-4
Re
tu
rn
to
Se
ct
io
n
T
O
C
Re
tu
rn
to
Se
ct
io
n
T
O
C
Re
tu
rn
to
Se
ct
io
n
T
O
C
Re
tu
rn
to
Se
ct
io
n
T
O
C
Re
tu
rn
to
Ma
st
e
r
T
O
C
Re
tu
rn
to
Ma
st
e
r
T
O
C
Re
tu
rn
to
Ma
st
e
r
T
O
C
Re
tu
rn
to
Ma
st
e
r
T
O
C
K435 - COIL ADAPTER
Permits 14 lb. (6 kg) Innershield coils to be mounted
on 2” (51 mm) O.D. spindles.
K363P - READI-REEL ADAPTER
Adapts Lincoln Readi-Reel coils of electrode 30 lb. (14
kg) and 22 lb. (10 kg) to a 2” (51 mm) spindle. Durable
molded plastic one piece construction. Designed for
easy loading; adapter remains on spindle for quick
changeover.
K438 - READI-REEL ADAPTER
Adapts Lincoln Readi-Reel coils of electrode 50-60 lb.
(22.7-27.2 kg) to a 2” (51 mm) spindle
GUNS AND GUN ADAPTERS
The Power Feed 10 Dual wire feeder is equipped with
a factory installed K1500-2 gun connection Kit. This kit
is for guns having a Tweco™ #2-#4 connector. The
Power Feed 10 Dual has been designed to make con-
necting a variety of guns easy and inexpensive with
the K1500 series of gun connection kits. Gun trigger
and dual procedure lead connections connect to the
single 5 pin receptacle on the front of the wire drive
box.
MAGNUM 200/300/400 GUNS
The easiest and least expensive way to use Magnum
200/300/400 guns with the Power Feed 10 Dual wire
feeder is to order them with the K466-10 connector kit,
or to buy a completely assembled Magnum gun hav-
ing the K466-10 connector (such as the K471-21, -22,
and -23 dedicated Magnum 400 guns and the K497-20
and -21 dedicated Magnum 200 guns).
MAGNUM 550 GUNS
The easiest and least expensive way to use the
Magnum 550 guns with Power Feed 10 Dual wire
feeders is to order the gun with the K613-2 connector
kit, and install a K1500-3 gun connection kit to the wire
feeder.
LINCOLN INNERSHIELD AND SUB ARC
GUNS
All of these guns can be connected to the Power Feed
by using the K1500-1 Adapter Kit.
LINCOLN FUME EXTRACTION GUNS
The K556 (250XA) and K566 (400XA) guns require
that a K489-7 Fast-Mate™ adapter kit be installed.
The K206, K289, and K309 require only the installation
of a K1500-1 connector in the Power Feed wire feed-
er.
NON-LINCOLN GUNS
Most competitive guns can be connected to the Power
Feed by using one of the K1500 series adapter kits.
GUN RECEIVER BUSHINGS AND
ADAPTERS
K489-7 (DUAL SCHEDULE FAST-MATE
ADAPTER)
This adapter installs directly into the wire drive feed-
plate, to provide for use of guns with Fast-Mate or
European style gun connections. This K489-7 will han-
dle both standard Fast-Mate and Dual Schedule Fast-
Mate guns.
K1500-1 (LINCOLN INNERSHIELD GUN
STANDARD CONNECTION)
Use this kit to connect the following guns: Guns hav-
ing a Lincoln standard innershield gun connector,
Magnum 200/300/400 with K466-1 connector kit, and
Magnum 550 guns with the K613-1 gun connection kit.
K1500-2 (TWECO #2-#4 TYPE CONNEC-
TION)
The K1500-2 gun adapter comes factory installed on
the Power Feed 10 Dual wire feeder. Use this adapter
for guns that have a Tweco #2-#4 connector. Such
guns include Magnum 200/300/400 guns with K466-2
connector kit, and completely factory assembled
Magnum guns that are factory equipped with the
K466-2 connector (such as the K471-21, -22, and -23
dedicated Magnum 400 guns and the K497-20 and -21
Magnum 200 guns).
K1500-3 (TWECO #5 CONNECTION)
For Magnum 550 gun with K613-2 Connection Kit,
and any other gun having a Tweco #5 connector .