Panasonic WJ-HD200 - Manual (Page 12)

12
■ Mounting in the Rack
1. Remove the four rubber feet by removing the five
screws on the bottom of the unit.
2. Place the rack mounting brackets on both sides of the
unit and tighten with the six supplied screws (M3 x10).
3. Install the unit with the rack mounting brackets in the
rack by using four screws (not included).
Remove 5 rubber feet.
Six screws (Supplied)
Fix the rack mounting brackets.
Rack
6. Assemble the optional HDD unit onto the bracket using
the absorbers, sleeves, and screws provided with the
recorder.
7. Place the HDD unit on the chassis, and fix it with six
screws.
8. Restore the fan cords and connectors as before.
9. Connect the power cable and flat cable on the rear of
the HDD unit.
10. Fix the top cover to the recorder with nine screws.