Switcher setup switcher setup, Common setup (common setup), Multi-screen sequence setup (multi sequence setup) – Panasonic WJ-HD200 User Manual
Page 65: Spot-screen sequence setup (spot sequence setup), Camera view setup (camera view setup), Multi sequence setup multi sequence setup, Camera channel (camera ch), Time (time)
66
SNMP System Name
Enter from the keyboard.
SNMP System Location
Enter from the keyboard.
Click the [SET] button if all are adequately set.
The WJ-HD200 will restart, and you will be requested to
enter the URL as described earlier in Main Page and
Control Panel.
■
Switcher Setup SWITCHER
SETUP
This window specifies sequence setups only for WJ-HD200.
Browser's sequence is set up in the LIVE SEQUENCE
SETUP in page 71.
8
Common Setup (COMMON SETUP)
Start Display (START DISPLAY)
The image in the selected form will be displayed on the
monitor when the unit is turned on.
Single Image:
CH 1 – CH 8
Quad Image:
QUAD-A (including 1-4), QUAD-B
(including 5-8)
Multi Image:
9-SCREEN (including 1-8)
Sequence:
SPOT SEQUENCE, MULTI SEQUENCE
Multi-screen Selection Mode (MULTI SELECT MODE)
When the [MULTI SCREEN SELECT] button on the front
panel is pressed, the monitor display will change as fol-
lows depending on the selection.
QUAD ONLY:
QUAD-A
→
QUAD-B
→
QUAD-A
ALL:
QUAD-A
→
QUAD-B
→
9-SCREEN
→
QUAD-A
8
Multi-screen Sequence Setup
(MULTI SEQUENCE SETUP)
Sequence Timing (SEQUENCE TIMING)
INT:
The preset time to the internal timer allows the
sequence to step forward.
EXT:
SEQ IN signal to the rear panel allows the
sequence to step forward.
Auto Skip (AUTO SKIP)
ON:
The sequence skips the step where no video is
input.
OFF:
The sequence does not skip the step.
Click the button to open the Multi Sequence Setup window.
8
Spot-screen Sequence Setup
(SPOT SEQUENCE SETUP)
Sequence Timing (SEQUENCE TIMING)
INT:
The preset time to the internal timer allows the
sequence to step forward.
EXT:
SEQ IN signal to the rear panel allows the
sequence to step forward.
Auto Skip (AUTO SKIP)
ON:
The sequence skips the step where no video is
input.
OFF:
The sequence does not skip the step.
Click the button to open the Spot Sequence Setup window.
8
Camera View Setup (CAMERA VIEW SETUP)
Click the button to open the Camera View Setup window.
■
Multi Sequence Setup MULTI
SEQUENCE SETUP
8
Camera Channel (CAMERA CH)
1 - 8:
The selected camera image will be displayed in
single spot mode.
QUAD A:
Camera image 1 through 4 will be displayed
in quad-split mode.
QUAD B:
Camera image 5 through 8 will be displayed
in quad-split mode.
8
Time (TIME)
Available duration:
2-30 S
Click the [SET] button if all are adequately set.