Alarm setup alarm setup, Alarm buzzer (alarm buzzer), Video loss detection (video loss detect) – Panasonic WJ-HD200 User Manual
Page 62: Monitoring mode (monitor mode), Video motion detector setup vmd setup, Sensitivity (sensitive), Vmd area setup (vmd area setup)
63
■
Video Motion Detector Setup
VMD SETUP
8
Sensitivity (SENSITIVE)
LOW:
Low sensitivity.
MID:
Medium sensitivity.
HIGH:
High sensitivity.
OFF:
Motion detection is disabled.
Click the [SET] button if all are adequately set.
Click the [SETUP] button to open the area setup window.
8
VMD Area Setup (VMD AREA SETUP)
Drag a maximum of four areas with the mouse to speci-
fy the detection areas.
Click the [SET] button if all are adequately set.
■
Alarm Setup ALARM SETUP
8
Alarm Buzzer (ALARM BUZZER)
ON:
Buzzer beeps while alarm is active.
OFF:
Buzzer does not beep.
8
Video Loss Detection (VIDEO LOSS DETECT)
OFF:
Deactivates the video loss detection.
ON:
Activates the detection.
8
Monitoring Mode (MONITOR MODE)
SPOT:
Switches to the picture of the channel that the
alarm operates.
OFF:
Retains the previous display mode.
Click the [SET] button if all are adequately set.